Expect to pay a pro somewhere around $200 to $300 in labor to hang an ordinary glass shower door replacement, and more for a frameless one. On top of that come the small extras: hauling the old door away, scraping off ancient caulk, perhaps a cracked tile.
Worth knowing before Black Friday, when $499 glass doors start popping up everywhere and the installation part is nowhere in the ad.
Framed Doors Are The Cheapest to Have Installed
Picture the door in most rentals: thin glass held inside an aluminum frame on all four sides. Because the frame takes the strain, the glass can be as slim as 3/16 or 1/4 inch, which makes the whole thing light and forgiving. If the installer is a hair off level, the frame covers it.
Light glass and loose tolerances mean fewer hours on the bill. It won’t win any design awards. It also won’t leak, and for a guest bath or a rental that may be all anyone needs.
Frameless Glass Costs More to Fit Because It’s Heavy And Unforgiving
Take the frame away and the glass has to stand up on its own, so it gets thicker: 3/8 or even 1/2 inch. At 3/8 inch, glass runs about 5 pounds a square foot. A 32-by-80-inch door works out at roughly 89 pounds.
Now imagine holding 89 pounds of glass dead still while somebody else drives the hinge screws, and getting it perfectly plumb, because if it’s even slightly off, the door swings open on its own or rubs the curb every time you close it. That’s what you’re paying for. Installers charge for the time, the second pair of hands and the risk.
Semi-Frameless Lands in Between
Here the fixed panel keeps some metal along its edges, and the swinging door doesn’t. Glass is generally 1/4 or 3/8 inch. It looks cleaner than framed and costs less than fully frameless, both to buy and to hang.
Extras That Can Show Up On The Final Invoice
The number on a quote tends to mean “put the new door in.” Plenty of other work can sit outside it:
- pulling out the old door and carting it off, which many quotes leave out.
- cutting away years of hardened caulk.
- patching tile or grout that cracks as the old track comes off.
- glass cut to order for an opening that isn’t a standard width.
- a premium for Saturday or evening appointments.
You may get none of these. You may get three. Ask about every one of them up front, and have the answers written into the quote.
Your Zip Code Affects The Labor More Than The Door Does
The same boxed door costs the same in Amarillo as in Brooklyn. The person fitting it doesn’t. Glaziers earned a national median of $55,440 in May 2024, and in pricey metro areas they earn more, which shows up in what they charge you.
If a company offers a flat installation price, take it seriously. With a flat price, a job that drags on won’t add a cent to your bill.
Can You Install It Yourself?
A framed door, yes, if you’re handy. You’ll want a drill, a level, a tape measure, a caulk gun and most of a Saturday. Measure the opening twice before ordering. Then measure it again.
Frameless? Probably not. Unless you’ve done one before, hire it out. The glass is tempered, and tempered glass that takes a knock on its edge can burst into pieces. There’s no frame to hide a crooked hang either.
So What Does That $499 Door Really Cost?
For a framed door hung by a pro, a rough tally:
- the door: $499.
- labor: $200 to $300.
- old door removal, if they charge for it: perhaps $50 to $100.
- all in: roughly $750 to $900.
Frameless will run higher than that, and custom glass or tile repair can push either figure up.
A few things that genuinely bring the total down:
- three quotes for the same job, side by side.
- a weekday booking.
- one combined price if a vanity or tiling job is happening anyway.
- picking framed or semi-frameless when the look isn’t the priority.
Call an installer with the door’s model number before you check out. Their quote tells you what the deal is really worth.

